Triple QR. The same points, seen from the side. Drag down to look at it from above.
About 8 MB, on this tap only
Triple QR
One square holds three QR codes here: the first sets each module's red, the second its green and the third its blue.
- Shelf
- Studio
- Kind
- Built from a recipe
- Your own
- Three codes in one
- Sound
- Yes
- Licenses
- Apache-2.0, MIT
How to play
Tap to pull the three codes apart. Read all three, or pick their colors, in the Splash tab.
Its controls
| Control | Kind | Range | Start |
|---|---|---|---|
| Pull the three apart | Tap | ||
| Pull apart | Button | ||
| Error correction | List | 4 choices | Level M |
| Red code's color | Color | #db1a1f | |
| Green code's color | Color | #1a9e33 | |
| Blue code's color | Color | #1f40d9 |
About it
One square holds three QR codes here: the first sets each module's red, the second its green and the third its blue. So each module is one of eight colors, from white to black.
Splashery's reader splits the picture into its red, green and blue and reads each one as an ordinary code, for three times the data in the same square. An ordinary phone reader sees only gray, which comes mostly from green, so it usually reads the green code or nothing. Tap the square to pull its three codes apart and back. Type your own three texts in the Splash tab, and pick the color each code shows in when pulled apart.
Details
- Splats
- Opens at 200,000 at Mid Detail, 59,383 at Low, and up to 719,151 at Max
Sources and credits
Made in Splashery. Its code is MIT.
Libraries
- Apache-2.0
- jsQR 1.4.0 (lane LSTUDIO)
- MIT
- QR Code generator library (Project Nayuki)
- MIT, Apache-2.0
- zxing-wasm 3.1.4, with zxing-cpp (copied from Splashery)
